Aluminum Cans Rinser Liquid Beverage Production Line

• After-sales Service: One-Stop Service
• Function: Can Rinser
• Material: SUS304
• Model NO.: KXGQ220
• Automation: Full Automatic
• Application: Pop Can
• Transport Package: Wooden Case
• Origin: Jiangsu

Product Description

The can washer is mainly used to wash and sterilize the empty can before filling and sealing, so as to ensure the filling quality.
Main Technical Parameters
1. Production capacity:720 cans/ min
2. Total weight:90kg
3. Dimensions:L2100mm*W370mm

Main Structures & Characteristics
1.The whole body is made of SUS304 stainless steel.
2.By adopting special imported spray nozzle, it can erupt conical water spray, which can wash the can body in all directions, make the inner of the can cleanliness reaches the food hygiene level, and equipped the sewage recovery port.
3.The slide adopts stainless steel skeleton and is coated with polyethylene wear-resistant strip to ensure that all contact parts of the can rinser with the can are made of polyethylene to prevent the scratches of the can.
4.This machine is equipped with one channel, the flushing area is one sections, which can be used in one type of can, and the installation is simple.
5.Automatic water supply unit
It is composed of horizontal multistage centrifugal pump, water tank, etc., and the pipeline is composed of circulating circuit, etc., and the pipeline is equipped with sewage outlet. Equipped with automatic water refill function, water pump with self-protection function, independent electrical control system
6.Hot water preparation unit
Equipped with adjustable control steam heating unit, heat exchange unit. The heat exchange unit is equipped with plate heat exchanger, and the pneumatic thin film regulating valve can effectively control the flushing water temperature at the outlet.

Can rinser	KXGQ110	One flushing section and one channel
	KXGQ120	One flushing section and two channels, with a set of lane changer
	KXGQ130	One flushing section and three channels, with a set of lane changer
	KXGQ210	Two flushing sections and one channel
	KXGQ220	Two flushing sections and two channels, with a set of lane changer
	KXGQ230	Two flushing sections and three channels, with a set of lane changer

Filler&Sealer
This machine is the latest automatic filling and sealing equipment developed by the company based on the digestion and absorption of domestic and foreign can filling and sealing machine. The principle of atmospheric pressure filling is adopted. When the empty tank enters the lifting tray through the dial wheel, the filling valve is aligned with the empty tank, and the empty tank is raised and sealed. At the same time, the valve port of the filling valve is automatically opened, and filling stops when the filling liquid level blocks the return pipe port of the valve. The filled can is sent to the head of the sealing machine through the hook chain, and the lid is sent to the mouth of the tank through the cap feeder and the indenter. When the supporting tank mechanism rises, the indenter presses the mouth of the tank, and the sealing wheel is pre-sealed and then sealed. After the jar is sealed, it is pushed out by the head of the capping mechanism, and then it enters the tank.After the end of production, the filling machine can realize one-click automatic CIP cleaning.

Main structural features
1.The electronic temperature display configuration is located at the unit control panel. The difference between the displayed temperature and actual temperature is ± 1ºC.
2.The level control in the filling barrel adopts three-point type high and low level control, installed with liquid level sight glass made of tempered glass.
3.When the temperature of liquid materials in the filling barrel is lower than the filling temperature,the machine will stop automatically.
4.The filling barrelis made of SUS316 stainless steel.
5.The parts in the filling head that contact the liquid materials are made of SUS304 stainless steel.
6.The filling unit and the sealing machine are provided with the safety protection device. The machine will stop automatically in case of no cover, no can, or can blocking.
7.Except that the grease needs to be added manually, automatic oiling and lubrication are realized at the mechanical part of the unit.
8.The electrical appliances in the unit adopt variable frequency control unit. The number of cans from O to the required quantity can be freely adjusted.
9.The rolling and sealing roller is designed with the worm adjusting screw for adjustment. It is provided with a scale, featured by convenient operation and adjustment.
10.All cam members in the seamer are subject to hardening and track surface fine grinding.
11.The surfaces of first and second rolling and sealing rolers are subject to titanium alloy plating.
12.All protective covers of the electric control box and unit are made of SUS304 stainless steel.