Automatic Lubricating Oil Leaking Inspector

• After-sales Service: One-Stop Service
• Warranty: 12 Months
• Transport Package: Wooden Case
• Model NO.: TJSYJY08
• Specification: 1600*950*2016mm

Product Description

Description
According to the complexity of lubricating oil production line and the particularity of large capacity, the leakage detection equipment is provided for detection. The equipment is a fully automatic multifunctional detection system equipment, the system is divided into two parts of the detection unit and a rejection unit.

Introduction
The inspection machine adopts two independent detection systems, which are used for detecting different forms of leakage of the aluminum film of the product, such as aluminium film not-tight seal, breakage, and cap loose.
Principle
The extrusion pressure unit uses extrusion and contact pressure sensing technology for detection. When the bottle body passes through the detection machine, the belt on both sides of the detection machine squeezes the bottle body, and the pressure sensor behind the belt transmits the pressure value in real time. The control center analyzes the pressure value and makes a judgment. In order to feedback the product aluminum film sealing whether there is leakage; The signal is transmitted to the eliminating device, which will remove the nonconforming product. 
The liquid level detection unit is based on the principle that X-ray technology and low-energy photon source interact with the measured substance, and the ray intensity changes with the position of the material surface to control the capacity of the filling liquid material. Because of its non-contact measurement method, it fundamentally solves the problem that the conventional weighing method can not measure the filling liquid material capacity in the production line. Therefore, it is widely used in the online detection of lubricating oil. The main structural characteristics of the detection unit: non-contact detection, detection speed, high precision; Can work in the pipelined transmission belt variable speed state, not limited by the transmission belt rate stability; The instrument has strong anti-interference ability, high reliability and good long-term stability; The number shows the cumulative count of qualified and rejected products.
Technical parameters

Item	Parameter
Dimension	1600*950*2016mm
Body Material	SUS304
Whole Machine Power	2KW
External Power Supply	AC380V
Supply Frequency	50/60HZ
Maximum Speed	24000BPH
Air Consumption	≈6.23L/ime
Temperature	0~50ºC
Working conditions	Air humidity≤95%; no condensate