| After-sales Service: | Lifelong Service |
|---|---|
| Warranty: | 12 Months |
| Type: | Micro Negative Pressure Filling Machine |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
KYGZ32/32/8 automatic bottle washing, filling and capping three-in-one machine
This machine is our company's own design and manufacture of bottle filling screw capping machine, equipment performance is stable, advanced technology, beautiful shape, complete function.
This machine is mainly used for hot filling of juice, tea drinks and other energy drinks. Only need to replace a small number of parts, and can be applied to pure water, mineral water filling.
1. Technical structure characteristics
1) Bottle flushing part:
This machine is a rotary bottle flushing machine, mainly used for new bottle flushing of beverage, water and other products. The bottle is then sent to the filling machine to fill the product.
The PET bottle is clamped by the clamp and the turning mechanism to the bottle mouth down, washed with sterile water and drained, automatically turned to the bottle mouth up, and transported to the filling machine through the bottle out star wheel. The main structure of the equipment and the contact part of the washing medium and the external protective cover are made of high quality stainless steel; Open gear drive.
New stainless steel clamp, simple structure, easy to adjust; Less contact area with the mouth of the bottle, effectively avoid secondary pollution to the mouth of the bottle.
The water inlet pipe of the bottle flushing machine is equipped with pressure gauge
The bottle flushing machine is equipped with a water receiving tray to recover the bottle flushing water
When the bottle is flushed, the amount of water flushed in each bottle is 105ml/s (0.25mpa).
2) Filling part:
In the filling part, the material is filled into the washed bottle sent by the bottle flushing machine.
The filling machine is designed by our company, the filling valve has independent intellectual property rights, the use of pressure filling negative pressure reflux filling principle.
Filling valve adopts pressure filling negative pressure reflux method, filling fast and sensitive, filling liquid level precision is high. There is no spring in the valve, and the material does not contact with the spring, which is conducive to the cleaning of the valve. Ensure filling process and filling temperature requirements. When the filling valve has no bottle or is shut down, the material in the valve is in the state of slight reflux.
Opening and closing valve devices are added before the filling valve to realize the opening valve filling, and the closing valve after the filling is completed can accurately control the filling level and avoid the material sprayed by the filling valve from polluting the bottle mouth. And can effectively control the material return flow ≤5 ~ 8%;
Filling cylinder adopts full cylinder way to ensure the pressure in the cylinder is stable.
The whole machine has a perfect CIP cleaning structure.
Adopt double guide rod bottle lifting structure to make bottle lifting and centering stable.
The main drive adopts the gear drive. That is the open type combination drive, which has the advantages of high efficiency, low noise, long service life, convenient maintenance and full lubrication. The main motor speed of the machine is controlled by frequency converter, and the machine adopts stepless frequency conversion to speed control.
Guide bottle system, the structure is simple, can be changed quickly and conveniently according to the bottle type, the whole machine adopts the card bottleneck structure to transport.
The whole machine PLC automatic control, fault online display, such as bottle blocking, lack of cover, etc.
The key parts and electrical components of the machine are imported products.
3) Screw the cover part:
In the capping part, the lid arranged by the capping device is screwed onto the bottle of the filled product and sent to the later process by the conveyor chain.
The capping machine drives the turntable to rotate through the reducer. Make the cover leave the hopper from the outlet of the cover under the action of centrifugal force. There is a separation device for the reverse cover at the exit. When the back cover passes through, the cover will automatically fall into the return pipe and blow the back cover into the hopper automatically through the wind. Only the positive cover can enter the slide smoothly. The cover amount in the hopper can be automatically detected by the photoelectric switch to control the feeding machine, so as to ensure the best effect of the lower cover. When the front cover enters the guide rail, it can enter the feeding tray smoothly. In order to prevent accidents, an anti-reverse cover dial is configured on the guide rail to ensure the correct cover entering the feeding tray. A pair of photoelectric switches are also configured on the guide rail to stop the main engine immediately when no cover is detected. In order to effectively eliminate the bad cover of no anti-theft ring and the residual cover of cleaning hopper, there is a movable exit directly opposite the hopper exit to meet this function.
Screw cover is magnetic screw cover, with overload protection function, and screw cover torque is stable and reliable. There is no gnawing cover, high cover, crooked cover, roll edge phenomenon.
The machine adopts centralized lubrication system to lubricate each lubrication point conveniently.
2. Technical parameters
1) Rated output (500ml bottles) : 12000 bottles/hour
2) Number of washing heads: 32
3) Bottle flushing station: 6
4) Drain station: 10
5) Number of filling valve heads: 32
6) Filling method: micro negative pressure
7) Filling valve flow rate: 120ml/s
8) Number of capping heads: 8
9) Applicable bottle type: PET bottle diameter: D=60 ~ 97mm
Bottle height: H=150 ~ 320mm
10) Capping torque: 0.6 ~ 2.8nm (adjustable)
11) Installed capacity of main engine: 4.18KW
12) Compressed air consumption: 0.8m3/min (0.6mpa)
13) Water consumption: about 1.5 ~ 2m3/h (0.2-0.25mpa) for bottle flushing
14) Overall dimension: 33800*2580*2850mm
15) Weight: 7.5 tons
Note: For the material reflux system, the power of the reflux pump is determined according to the head.
3. Technical indicators
| NO | ITEM | INDUSTRIAL STANDARD | INDEX |
| 1 | CLEAN RATE | 100% | 100% |
| 2 | FILLING LEVEL ERROR | ±4mm | ±3mm |
| 3 | BOTTLE DAMAGE RATE | ≤0.2% | ≤0.08% |
| 4 | CAP DAMAGE RATE | ≤0.5% | |
| 5 | LIQUID DAMAGE RATE | ≤0.5% | ≤0.3% |
| 6 | LIQUID RETURN FLOW | ≤10% | ≤5~8% |
| 7 | SCEW CAP TORQUE | 0.6~2.8N·m adjustable | ±15% |
| 8 | CAPPING QUALIFICATION | 99% | ≥99.5% |
| NO | NAME | BRAND |
| 1 | PLC | SIEMENS |
| 2 | TOUCH SCREEN | SIEMENS |
| 3 | FREQUENCY CONVERTOR | SIEMENS |
| 4 | AIR SWITHC, CIRCIUT BREAKER, CONTACTOR | SCHNEIDER |
| 5 | PHOTOELECTRIC SWITCH | SICK |
| 6 | PROXIMITY SWITCH | SICK |
| 7 | INTERMEDIATE RELAY | FUJI |
| 8 | TEMPERATURE CONTROL, PRESSURE METER | OMRON |
| 9 | MAIN MOTOR | ABB |
| 10 | BEARING | HAERBING |
| 11 | LUBRICATING BEARING | IGUS |
| 12 | SEALING COMPONENTS | SEALTECH |
| 13 | pneumatic components | FESTO |
| 14 | WATER PUMP | CNP |
Q: Are you a factory or a trading company?
A: We are factory manufacturing packaging machines and we provide perfect OEM and after-sale service.
Q: How long the warranty will be?
A: We provide 12 months for the main parts of the machine and lifelong service for all the machineries.
Q: How to find sunrise machine?
A: Search Alibaba, Google, YouTube and find suppliers and manufacture and not traders.
Visit exhibition in different countries.
Send SUNRISE Machine an request and tell your basic inquiry.
SUNRISE Machine sales manager will reply you in short time and add instant chatting tool.
Q: You are welcome to our factory at any time.
A: If we can fulfill your request and you interested in our products, you may pay a visit to SUNRISE factory site.
The meaning of visiting supplier, because seeing is believing, SUNRISE with own manufacture and developed& research team, we can send you engineers and make sure your after sales service.
Q: How to guarantee your funds to be safe and delivery to be on time?
A: Through Alibaba letter guarantee service, it will ensure the on time delivery and the quality of the equipment you want to buy.
By letter of credit, you can lock the delivery time easily.
After the factory visit, You can ensure the facticity of our bank account.
Q: See SUNRISE machine how to ensure the quality!
A: In order to ensure the accuracy of each part, we are equipped with a variety of professional processing equipment and we have accumulated professional processing methods over the past years.
Each component before assembly needs strictly control by inspecting personnel.
Each assembly is in charged by a master who has working experience for more than 5 years.
After all the equipment are completed, we will connect all the machines and run the full production line for at least 12 hours to ensure the stable running in customers' factory.
Q:The after-sale service of SUNRISE machine!
A: After finish the production, we will debug the production line, take photos, videos and send them to customers via mail or instant tools.
After the commissioning, we will package the equipment by standard export package for shipment.
According to the customer's request, we can arrange our engineers to customers' factory to do the installation and training.
Engineers, sales managers and after-sales service manager will form an after-sales team, online and off line, to follow the customers' project.
){kind=link}