Bottle Can Case Packer Carton Case Packing Machine

• Automatic Grade: Automatic
• Application: Beverage
• Packing Material: Metal
• Model NO.: KGBZX
• Paking Type: Carton Box
• Applicable Product: Pet, PP, Can, Glass
• Transport Package: Wooden Case

Product Description

The machine has a mesh belt conveyor to arrange the products neatly into six rows, five rows or four rows (depending on the packaging method), and the paper is also stacked on one side. , When the paper and the product reach the positioning point, the machine push mechanism is used to swing the product left and right to make the product fall on the paper lightly. There is a set of air cylinders and suction cups under the paper to pull down the paper and the product to form. After forming, the chain is used to drive the product forward. And re-do the forward action, after the box is formed, every time it is transported forward, it will do the glue spraying and bonding action, and push it forward to the conveyor to move forward, and then do the stacking pallet action. The can products use the swing arm to assist the bottle feeding method, and the plastic bottle adopts the automatic bottle divider to assist the bottle feeding method.
Descriptions of applicable products
1.The packaging cartons are piece type.
2.Full-case box type automatic packaging of various PET, PP, pop cans and glass bottles
3.Automatic bottle packaging of various daily commodities
4.Gift box type, full-case, semi-case box type automatic packaging of various heat shrink film small packages

Technical parameter

Model:	KGBZX
Type:	sheet type carton packing machine, thermal sol sealing box
Capacity:	20-25 boxes/min
Working power supply:	AC 380V, 3 phase, 50HZ
Control power supply:	DC24V, AC 220V, single phase, 50HZ,
Packaging method:	according to customer requirements
Compressed air pressure:	>= 6.0kg /cm2
Air consumption:	1200 L/ min
Packing material:	corrugated paper
Equipment size (about):	L5800 X W2550 X H1800mm
Conveyor height (approx.):	Inlet docking: 1260mm Out of the crib: 865 mm

Main structure and characteristics
1. The whole frame base is made of high quality carbon steel profiles, with good structural rigidity.
2. The CAM divider is used for accurate synchronous positioning to ensure smooth and reliable rhythm movement.
3, the main drive reducer using SEW company products, stable power output.
4, the working process, the start and the final step are slow and stable, fast running halfway, shorten the non-working time, high productivity.
5. AirTAC pneumatic components and advanced electronic control technology reduce the risk of equipment downtime.
6. The machine is not only equipped with protective cover plate, but also equipped with overload protection device, which has high safety performance.
7. The machine has low noise and adopts oil-free lubricating pneumatic components to avoid oil pollution.
8, the use of touch screen operation, man-machine dialogue, can adjust the package type, show the production speed, fault cause and location.
Principle
When packing, first pile up on the cardboard bin with good marks and cut corners of the single cardboard out, and pre-folded into a right Angle. Then the piled material is pushed to a certain position of the board with the pusher plate, and then the box is wrapped according to the indentation on the board, and then sent out after gluing and sealing the box.

This packing machine can be used for packaging a variety of products, such as: PET bottles, PC bottles, cans, glass bottles, etc., the use of fully open control mode, fully automatic operation mode; Using thermal sol to seal the box, in line with the development of international food hygiene requirements.